Installation

1 – Be sure that the surface you are applying the vinyl sticker is; smooth, dry and free from dust and dirt.  Vinyl stickers can be applied to walls, wood, glass, concrete, floors, metal or any smooth clean dry surface.  The stickers are removable but may not be reused or repositioned.  Do not apply to freshly painted walls, wait a minimum of 2 weeks after painitng.

 

2 – Lay your vinyl sticker on a flat surface, graphic side up.  rub the sticker with your fingers or a credit card to ensure the application tape is completely stuck to your sticker.  If you need to, roughly cut out stickers from your sheet to apply them individually.

 

3 – Arrange your vinyl sticker on the surface they are to be applied, you can temporarily attach with masking tape.  Once you are happy with the layout slowly remove the backing from your sticker (if you have multiple stickers it is best to remove one at a time) the vinyl sticker should be sticking to the application tape, if some decal remains stuck to the backing paper, STOP.  Rub the decal in that area and slowly continur peeling until the backing paper is completely removed.  As you lower the sticker to the surface it is to be applied, carefully rub your hand slowly across the decal, starting at the top and working your way to the edges and bottom of the sticker.  To finish the application use a credit card or something similar to rub over the graphic removing any air bubbles and ensuring the sticker is completely stuck to the wall.

 

4 – Finally, gently peel off the application tape making sure the sticker is sticking to the surface and not the application tape.

 

TIP– For larger stickers you may need 2 people to apply.  When applying stickers that are in more than 1 piece such as trees overlap by approx 2-3mm as the sticker may shrink slightly in a warm room.
To remove the decal you can peel it off your surface using a hair dryer to heat up the adhesive to allow the decal to come off easier.

 

Please note that we are not responsible for any damage caused by applying or removing a decal from any surface.